Record Player Reviews

wordpress review theme wordpress affiliate theme review theme affiliate theme wordpress review themes wordpress affiliate themes review themes affiliate themes

Rega P1 review

The Rega  P1

Rega P1The Rega P1 is simply one of the best turntable for the money: cheap and great-sounding! Its minimalist design will appeal to both beginners and people looking to replace an old record player with a simple yet effective turntable.
Price: $445


The P1 is Rega’s most affordable turntable at just $445, and also its most minimalist: its only two features are the power switch and a manual 45-rpm speed adjustment.

Rega has been making turntables since the 1970s. At the time, Rega took a simple approach by focusing on basic engineering and performance, eliminating gimmicks… in essence, paring their product down to what was needed to make music sound engaging and real. The Rega P1 constitutes the first time that one of the industry’s top designer has made a record player this affordable, as in cheap. The P1 has an austere appearance: a clean-looking, lightweight wooden plinth covered in dark semigloss laminate. The P1 uses the same sort of molded subplatter, with the same sort of interference-fit bearing spindle as the more high-end P2 and P3.

In order to sell the P1 for as cheap as $445 ($360 used), Rega had to make savings in some major ways. The first is the included RB100 tonearm, a simplified version of Rega’s successful RB300 arms: the one-piece armtube casting has been replaced with a simple alloy tube with a bonded aluminum headshell, and the spring-actuated downforce of the more expensive tonearms has given way to a simple adjustable counterweight.

Rega designed the RB100 tonearm’s counterweight so that the user could push it all the way forward, to the limit of its travel, to accomplish a tracking force of about 1.75 grams when used with a 4.8 grams cartridge, which is exactly what the pre-installed Ortofon OM 5E moving magnet cartridge weighs. The OM 5E is near the low end of Ortofon’s long-running OM cartridge line, but it offers an easy upgrade path with the simple substitution of a stylus (see the upgrades section further below). The cartridge has already been aligned for you and this makes setup of the turntable ultra simple.

The second fundamental change is that Rega’s famous glass platter has been rolled back, in favor of a black medium density fiber (MDF) platter. The new fiberboard platter is 11/16’’ thick, and is machined in an attempt to concentrate a bit more mass toward the periphery than toward the center – although we doubt it makes much of a difference. Now while the MDF platter is admittedly a compromise, it should be appreciated that it would be impossible to make this entry-level price point with a glass platter. In fact, the MDF platter is shockingly good for a product in this price range. There are platters on four-figure turntables, made of both alloy and acrylic, that aren’t nearly as good.


The P1 produces a rich, warm sound and a large soundstage that immerses one within the music. It is pacey, but not bright or crisp. Listeners whose analog experience runs deeper and with arguably more sophisticated tastes might consider the P1 a bit dark sounding. However, the P1 will make even your worn-out, crappy-sounding records tolerable, and actually make you enjoy them more than some other more expensive turntables. It is especially excellent with 33 rpm records.

The Rega P1 captures the tension of your music, to fine, dramatic effect, and does a fine job of putting across the momentum, depth and flow of even the most challenging musical pieces. The instruments sound present and solid.

The Rega P1’s performance changes noticeably during the break-in period (You need to break in the drive motor by letting it run non-stop for 24-48 hours. This is critical.). The sound becomes cleaner after the first week, with an audible decrease in flutter.

The only shortcoming of the P1 is a lingering trace of pitch instability, as heard in sustained piano chords, but it will not intrude on your average record-listening experience.

Actually, some more expensive contemporary turntables and more than a few CD players don’t even sound as good as the Rega P1.

Set up

Armed with the simple setup instructions that are provided, event a complete beginner can setup this turntable up in less than ten minutes. It couldn’t be easier.

Getting the P1 rockin’ requires little more than putting the P1 on a level supporting surface, installing the belt and putting the platter and mat on the subplatter, positioning the anti-skating slider toward the notch labeled ‘2’, and screwing on the tonearm’s counterweight as far as it will go. Quick note on the counterweight: although Rega says that it provides the proper tracking force for the pre-mounted Ortofon, make sure to do a quick check with a calibrated scale. You may find that it’s slightly higher than the cartridge’s 2-gram recommended maximum tracking force. Backing off the counterweight by about a [1/4]-turn will get things right where they should be.

As we said earlier, the cartridge is already aligned for both overhang (front to back position) and zenith (rotational position), and while the RB100 tonearm doesn’t have a height adjustment, the fixed position appeared to be about right for the Ortofon.

The RP1 uses a highly accurate manual speed change rather than an automatic mechanism. This approach eliminates speed inconsistencies and also reduces wear of the drive belt.

For those new to turntables or those accustomed to the automatic ones, a fully manual turntable means that aside from the power switch to start the turntable, everything else is manual. For instance, after starting the turntable you will need to place the tonearm at the beginning of the record to start playback. When the music is over, you will manually need to lift the tonearm off the end of the record as there is no automatic mechanism that will return the tonearm. Furthermore, if you would ever like to change the speed of the turntable, there is no simple switch that you can flip. To change the playback speed of the Rega P1 to 45-rpm, you need to remove the platter and then loop the belt by hand to the larger pulley step, and vice-versa. All of this is very simple to do, but it is worth mentioning for those who are not familiar with how manual turntables operate.


“It’s a budget deck that doesn’t sound like one,” raves England’s What Hi-Fi? magazine in a Five Star review for November 2010. “It sounds surefooted and confident.”

“For the audiophile who has yet to take the vinyl plunge… the Rega RP-1 is an easy, enthusiastic recommendation,” observes Art Dudley in the May 2011 issue of Stereophile magazine. “Warmly recommended.”

“The RP1 offers solid performance, excellent value and is a great place to start listening to vinyl,” notes Jeff Dorgay in Tone Audio magazine. “After extended listening sessions in three very different levels of systems, the RP1 definitely delivers a solid helping of analog magic.”

“Rega’s new RP-1 turntable might just be the perfect source for Stereophile‘s new monthly column, ‘The Entry Level’,” reports Stephen Mejias in his Stereophile blog for July 30, 2010. “All the cool kids are going to want one of these.”

“The RP1 is a great turntable and one that will force the competition to up its game,” opines Jason Kennedy in issue 339 of Hi-fi Choice magazine.

In Stereophile Vol 30 No.5 May, 2007, Art Dudley had many positive things to say about the Rega P1 turntable:  “As for most other LPs I tried, the Rega P1 didn’t just do an adequate job with musical basics — it nailed them.

The Rega P1 marks the first time in my experience that a designer whose work ranks with the very best has created an audio component this affordable. And by affordable I don’t mean relatively affordable, as with our favorite entry-level Koetsus, entry-level Wilsons, and even entry-level Linns. I mean affordable as in cheap, as in sane, as in reachable by anyone with a job.” “Very strongly recommended.


By swapping out the stylus of the Ortofon OM-5SE cartridge, you can upgrade the cartridge to an OM-10, OM-20, OM-30, or OM-40, if you prefer different shaped stylii:

  • Super OM-10 eliptical stylus $50 (you wouldn’t get the full benefit, since the 10 is different from the 5 electrically).
  • Super OM-20 nude eliptical stylus $95
  • Super OM-30 nude fine-line stylus $140
  • Super OM-40 van den Hul stylus $229

Other cartridges you can try it with: Rega Elys moving-magnet and a Goldring Elite moving-coil (which doesn’t outperform the OM E5 in any audible way).

AmazonRega - RP1 Turntable - Grey

Too Low to Display

Go to Store
AmazonRega - RP1 Turntable - White

Too Low to Display

used from: 375.00

Go to Store
AmazonRega - RP1 Turntable - Titanium

Too Low to Display

used from: 569.00

Go to Store
Product prices and availability are accurate as of Jun 30 11:00:12 UTC but are subject to change. Any price and availability information displayed on the merchant site at the time of purchase will apply to the purchase of this product.

Features :

  • Two-speed belt drive
  • RB100 aluminum-alloy tonearm
  • MDF platter
  • Comes with Ortofon OM5E moving magnet phono cartridge with replaceable stylus
  • Precision main bearing and sub-platter assembly
  • High Quality low vibration motor
  • All new Phenolic resin flywheel effect platter for excellent speed stability
  • Rega sound quality at an unrivalled price


  • Dimensions: 17.5″ (450mm) wide, 4.5″ (115mm) high (with dustcover), 15″ (385mm) deep
  • Weight: 12 lbs
  • Tonearm spindle to pivot distance: 222.8mm
  • Tonearm effective length: 240mm
  • Downforce: noncalibrated counterweight
  • Antiskating: calibrated sliding magnet

Manual:Get it here

If you enjoyed this review, please consider sharing it or leaving a comment below.

Write a review

You must be logged in to post a comment.

wordpress review theme wordpress affiliate theme review theme affiliate theme wordpress review themes wordpress affiliate themes review themes affiliate themes